IPv6 Address Table | Linksys SFE2010P specification

Using the Console

System Configuration

IPv6 Address Table

The IPv6 Address Table lists the IPv6 addresses that are configured.

To open this screen:

1.From the Switch Main Menu, select 1. System Configuration.

2.From the System Configuration Menu, select 6. IP Configuration.

3.From the IP Configuration menu, select 2. IPv6 Address Configuration.

4.From the IPv6 Address Configuration menu, select 3. IPv6 Address Table.

IPv6 ISATAP Enable

You can use the IPv6 ISATAP Enable screen to configure the ISATAP tunnel.

To open this screen:

1.From the Switch Main Menu, select 1. System Configuration.

2.From the System Configuration Menu, select 6. IP Configuration.

3.From the IP Configuration menu, select 2. IPv6 Address Configuration.

4.From the IPv6 Address Configuration menu, select 4. IPv6 ISATAP Enable.

SFE2010/SFE2010P Administration Guide

34

Image 37

Linksys SFE2010P manual IPv6 Address Table

Contents

Port 10/100 Ethernet Switch Table of Contents Contacts What’s in this User Guide? Welcome SFE2010/P Front Panel Getting to Know the SFE2010/SFE2010P Getting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Maximum Cabling Distances Sample Network Configuration Placement Options Before You Install the SwitchDesktop Placement Rack-Mount Placement Wall-Mount Placement Connecting the Cables Connecting Devices Using Menus in the Web-Based Utility Connecting to the Switch with the Web-Based Utility Viewing On-line Help Connecting to Your Switch with HyperTerminal Using the Console Using the Console Set the serial port settings as follows Logging On to the Console Connecting to the Switch with TelnetSelecting Menu Options and Actions System Configuration Using the Switch Main Menu To open this screen System InformationTo open this menu General Information Versions To change the system contact, system name, and location Management Settings Telnet Configuration Serial Port ConfigurationTo change the baud rate of the serial port To change the time-out setting SSH Configuration To change SSH Server settings SSH Server Configuration To change SSH Crypto Key Generation settings To generate the crypto key Username & Password Settings To change User & Password settings Security Settings To edit and execute a certificate SSL Generate Certificate To disable the active management access profile Disable Active Management Access ProfileShow Certificate Vlan Management Default Vlan Setup To edit the Vlan ID IP Configuration IPv4 Address Configuration To edit the IPv4 address settings IPv6 Address ConfigurationTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings To edit the IPv6 default gateway settings IPv6 Default Gateway Https Configuration Http ConfigurationTo change the Http settings To open the screen To change Https settings Network Configuration To begin the ping test To change the IP address Ping IPv6 To begin the trace route test TraceRoute IPv6 File Management Upgrade / Backup IPv4 To enter the IPv4 Upgrade/Backup file name and location Upgrade / Backup IPv6To enter the IPv6 Upgrade/Backup file name and location To download a file from the specified location Active Image To enter the active image settings Reset to Factory Settings Restore System Default SettingsReboot System To restore system default settings Port Status Stack Configuration PoE Status Port Status Port Settings Port Configuration To configure the ports PoE Settings To configure the PoE settings System Mode Layer 2 / Layer 3 Selection Help To edit the system mode or stacking mode Logout EU Contacts US/Canada Contacts Customer Site Survey Yes Exclusions and Limitations Limited Warranty Obtaining Warranty Service Obtaining Warranty Service Technical Support EC Declaration of Conformity Europe Industry Canada Statement Specifications Radius Vlan EMC 080312A-LB