IPv6 Default Gateway | Linksys SFE2010P guide

Using the Console

System Configuration

IPv6 Default Gateway

You can use the IPv6 Default Gateway screen to view or edit information about the IPv6 Default Gateway.

To open this screen:

1.From the Switch Main Menu, select 1. System Configuration.

2.From the System Configuration Menu, select 6. IP Configuration.

3.From the IP Configuration menu, select 2. IPv6 Address Configuration.

4.From the IPv6 Address Configuration menu, select 6. IPv6 Default Gateway.

To edit the IPv6 default gateway settings:

1.Select Edit., and then make the changes. Press the Tab key to move the cursor from one field to the next.

NOTE: To change the state of the gateway, move the cursor to the State field, and then press the Space Bar to toggle between ENABLE and DISABLE.

2.Press the Esc key to move the cursor to the Action list.

3.Select Execute to save your settings

4.When the Operation complete message appears, press the Esc key to move the cursor to the Action list.

SFE2010/SFE2010P Administration Guide

36

Image 39

Linksys SFE2010P manual IPv6 Default Gateway, To edit the IPv6 default gateway settings

Contents

Port 10/100 Ethernet Switch Table of Contents Contacts What’s in this User Guide? Welcome SFE2010/P Front Panel Getting to Know the SFE2010/SFE2010P Getting to Know the SFE2010/SFE2010P SFE2010/P Back Panel Maximum Cabling Distances Sample Network Configuration Before You Install the Switch Placement OptionsDesktop Placement Rack-Mount Placement Wall-Mount Placement Connecting the Cables Connecting Devices Using Menus in the Web-Based Utility Connecting to the Switch with the Web-Based Utility Viewing On-line Help Connecting to Your Switch with HyperTerminal Using the Console Using the Console Set the serial port settings as follows Connecting to the Switch with Telnet Logging On to the ConsoleSelecting Menu Options and Actions System Configuration Using the Switch Main Menu System Information To open this screenTo open this menu General Information Versions To change the system contact, system name, and location Management Settings Serial Port Configuration Telnet ConfigurationTo change the baud rate of the serial port To change the time-out setting SSH Configuration To change SSH Server settings SSH Server Configuration To change SSH Crypto Key Generation settings To generate the crypto key Username & Password Settings To change User & Password settings Security Settings To edit and execute a certificate SSL Generate Certificate Disable Active Management Access Profile To disable the active management access profileShow Certificate Vlan Management Default Vlan Setup To edit the Vlan ID IP Configuration IPv4 Address Configuration IPv6 Address Configuration To edit the IPv4 address settingsTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings To edit the IPv6 default gateway settings IPv6 Default Gateway To open the screen Http ConfigurationHttps Configuration To change the Http settings To change Https settings Network Configuration To begin the ping test To change the IP address Ping IPv6 To begin the trace route test TraceRoute IPv6 File Management Upgrade / Backup IPv4 To download a file from the specified location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To enter the IPv6 Upgrade/Backup file name and location Active Image To enter the active image settings To restore system default settings Restore System Default SettingsReset to Factory Settings Reboot System Port Status Stack Configuration PoE Status Port Status Port Settings Port Configuration To configure the ports PoE Settings To configure the PoE settings System Mode Layer 2 / Layer 3 Selection Help To edit the system mode or stacking mode Logout EU Contacts US/Canada Contacts Customer Site Survey Yes Exclusions and Limitations Limited Warranty Obtaining Warranty Service Obtaining Warranty Service Technical Support EC Declaration of Conformity Europe Industry Canada Statement Specifications Radius Vlan EMC 080312A-LB