Using the Console

Connecting to Your Switch with HyperTerminal

4. Set the serial port settings as follows:

Bits per second: 115200

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

5.Then, click the OK button.

6.Optionally, on the File menu, click Save to save these settings. The next time that you need to connect to the console, you can open this saved connection.

SFE2010/SFE2010P Administration Guide

14

Page 17
Image 17
Linksys SFE2010P manual Set the serial port settings as follows