Linksys manual Getting to Know the SFE2010/SFE2010P

Getting to Know the SFE2010/SFE2010P

Feature	Description
1-48	The Switch is equipped with 48 auto-sensing, Ethernet (802.3) network
	ports, which use RJ-45 connectors. The Fast Ethernet ports support
	network speeds of 10Mbps or 100Mbps. They can operate in half and full-
	duplex modes. Auto-sensing technology enables each port to
	automatically detect the speed of the device connected to it, and adjust
	its speed and duplex accordingly.
	The switch can deliver a maximum of 15.4W to a PoE port. With regular AC
	power supply, there is 360W available to all PoE ports, and 280W available
	with redundant power supply.
G1-G2	Ports G1-G2 are Ethernet (802.3ab) uplink ports which support network
	speeds of 10Mbps, 100Mbps, and 1000Mbps.
	NOTE: A switch is in stacking mode by default. In stacking mode, ports G1
	and G2 are reserved for use as stacking ports.
miniGBIC1/2	The Switch provides two mini-GBIC ports. The mini-GBIC (gigabit interface
	converter) port is a connection point for a mini-GBIC expansion module,
	so the Switch can be uplinked via fiber to another switch. Each mini-GBIC
	port provides a link to a high-speed network segment or individual
	workstation at speeds of up to 1000Mbps.
	Use the Linksys MGBT1, MGBSX1, or MGBLH1 mini-GBIC modules with the
	Switch. The MGBSX1 and the MGBLH1 require fiber cabling with LC
	connectors, while the MGBT1 requires a Category 5e Ethernet cable with
	an RJ-45 connector.

SFE2010/SFE2010P Administration Guide 3