Using the Console
System Configuration
To open the screen:
1.From the Switch Main Menu, select 1. System Configuration.
2.From the System Configuration Menu, select 6. IP Configuration.
3.From the IP Configuration menu, select 4. HTTPS Configuration.
To change HTTPS settings:
1.Select Edit, and then make your changes.
2.Press the Esc key to move the cursor to the Action list.
3.Select Save to save your changes.
4.When the Operation complete message appears, press the Esc key to move the cursor to the Action list.
Network Configuration
The Network Configuration screen provides access to screens where you can execute ping tests and traceroute tests for IPv4 and IPv6 addresses.
1.Ping IPv4 (see page 39)
2.Ping IPv6 (see page 40)
3.TraceRoute IPv4 (see page 41)
4.TraceRoute IPv6 (see page 42)
0.Back (Select to return to the previous menu.)
To open the screen:
1.From the Switch Main Menu, select 1. System Configuration.
2.From the System Configuration Menu, select 6. IP Configuration.
3.From the IP Configuration menu, select 5. Network Configuration.
SFE2010/SFE2010P Administration Guide | 38 |
