Linksys EtherFast® Series
10.Optional: Choose the Access Control tab. Make sure that
11.Click the OK button. Your system may or may not ask you for your Windows Millennium
C:\windows\options\cabs).
12.Once Windows has copied the necessary files, the System Settings Change window appears. Remove all disks from your PC and click Yes to restart your PC. If you don't see this window, simply shut down Windows Millennium and restart your PC. Remember to remove the Driver Disk from the floppy drive prior to rebooting.
10/100 USB Network Adapter
13.A Logon window will appear, requiring you to enter a User name and Password. Make up a user name and password (if you haven’t already) and click OK. Do not click the Cancel button or Escape [ESC] key.
Clicking either of these buttons will prevent you from logging into the network. If the logon does not appear or if it does not allow you to log on, refer to the Troubleshooting section.
14.Once you are at the Windows Millennium desktop,
•If you can see your computer along with all the other computers on the network in Network Neighborhood, then the Windows Millennium network configuration is complete. Continue with Sharing Your Files and Printers in Windows on the next page if you want data from your PC to be available to others on the network. You may stop here, however, if you wish to configure File and Print Sharing at a later time.
•If you don't see anything at all in Network Neighborhood, press the F5 key on your keyboard a few times to refresh the screen. If that doesn’t work, go to the Troubleshooting section.
•If you only see your own computer in Network Neighborhood, skip to the Troubleshooting section.
•If you see all computers on the network except yours, press the F5 key a few times. If, after a minute or so, you still can’t see your own PC, see the Troubleshooting section.
•If you only see computers that are running the same operating system as you and you don’t see any others, go to the Troubleshooting section.
25 | 26 |
