Picture in Picture

Picture in Picture (PIP)

The concurrent display of two different images is referred to as Picture in Picture.

➠The coloured buttons do not work as described below for TV sets with MHEG-5 software, but they operate as described on page 33 (Digital Teletext).

➠A concurrent representation of two HDTV signals is not possible.

➠A concurrent representation of two coded stations is not possible.

➠Picture change and station selection is restricted during recording.

Your TV set distinguishes between two PIP displays:

Split screen In this case the screen is divided in the middle and the ad- ditonal PIP image is shown on the right side of the screen. Both images are compressed horizontally and each gets half of the screen.

Small PIP In this case a small PIP image is inserted in the TV picture.

The PIP operation distinguishes between two functionalities:

Standard PIP Stations freely selectable and changeable for PIP and TV picture (coloured buttons have PIP-specific meaning, see below).

iPIP The TV picture is moved to the PIP picture when you press the PIP button. The station of the TV picture is now freely selectable. When you press the PIP button again, the PIP pic- ture returns to the TV picture and the PIP window closes.

Start and end Picture in Picture mode

Show/hide PIP.

In the Standard PIP function a green frame indicates that the station selection acts on the PIP picture. A white frame means that the operation refers to the main picture. If the frame is blue, the station scan is active in the PIP picture. If the iPIP function is activated, this is indicated by an orange frame.

➠For TV sets with MHEG-5 Software, you switch from the green bar/frame to the white by using the PIP key. The next time you press the PIP key, PIP is switched off.

Standard PIP operation:

PIP as freeze picture

➠The frame is green,

if not, press the green button.

Red button: Freeze picture in PIP on / off.