Loewe R 37 Full-HD+ 100, R 37 HD+ 100 operating instructions Button functions

Daily operation

Button functions

Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer, MusicBox and DR archive) has its own menu and own functions for the col- oured buttons. The function of the coloured buttons is shown at the bottom of the menus and wizards. Below, some of the function are listed which you need in TV mode for the daily handling of your TV set.

Functions of the coloured buttons in TV mode

➠The coloured buttons do not work as described below for TV sets with MHEG-5 software, but they operate as described on page 33 (Digital Teletext).

Red button: Digital Recorder: DR archive on/off.

For TV sets with MHEG-5 software you can open the DR archive via the menu Assist+ (see page 15).

Green button: Open the Teletext functions menu.

			INFO END
Teletext functions
Teletext subtitles		Personal text pages
on, with normal size	...

34Select Teletext subtitles or Personal text pages. 6 Go to the menu line below in Teletext subtitles.

34Select the size of the Teletext subtitles,

OK show Teletext subtitles.

(display only if subtitles are available). END: Teletext subtitles off or select off in menu.

OK in Personal text pages calls the teletext pages or the teletext page directly if only one page is noted (for

defining pages, see page 33).

Yellow button: Go to the last viewed station.

Use this button to quickly switch back and forth between two stations. For MHEG-5 see page 18 or on this page at the right lower column.

Blue button: Show programme info.

For MHEG-5, no programme info is available.

1 ARD

14:30 - 15.15 Urlaubsparadies Toskana

Programme info	14:43	END
Detailed info	OK	Detailed info (teletext) Programme preview

Permanent display of time

Press twice in rapid succession: Time is displayed permanently.

14:42

K or END: Hide time.

Selecting the picture format

Press the picture format button until the desired picture format is set or press

34to select the desired picture format.

The Panorama picture format can be switched between proportionally correct and format filling reproduction. Dark margins are visible on the right and left of the picture in proportionally correct reproduction.

Switching over: Keep the M button on the set pressed, at the same time press the Picture format button on the remote control briefly.

Resetting: Press the same button combination again.

Explanations of the picture formats:

	➠ The setting options depend on the transmitted picture
	content.
16:9	Proportionally correct display of 16:9 programmes.
4:3	Proportionally correct display of 4:3 programmes.
Panorama	Proportionally correct or format filling reproduction
	(delivery status) of 4:3 broadcasts on the 16:9 screen.
	Station logos and subtitles remain visible.
	See above for switching Panorama mode.
Cinema	Proportionally correct, format filling display of 4:3 broad-
	casts on 16:9 screens. Station logo and subtitles usually
	not visible.
Zoom	Proportionally correct display. Maximum picture magnification.
PALplus	Is a 4:3-compatible 16:9 picture broadcast supplied by
	the station which is detected automatically.
	If a high-resolution picture signal is displayed on the TV
	set or fed in via the interfaces PC IN, HDMI1/DVI, HDMI2/
	DVI or COMP. IN, the picture formats 16:9 TV, 4:3 TV as
	well as 16:9 PC and 4:3 PC can be set.

Move picture vertically

➠In normal TV mode, without other displays:

56Move picture up/down.

To show subtitles or news tickers which have been cut off, the picture can be moved up or down in the picture formats Panorama, Cinema and Zoom (not with high resolution signal) with the arrow buttons 56.

➠For TV sets with MHEG-5 software you can switch back and forth quickly between two stations using these buttons (see also on page 18).

- 22