Loewe R 37 Full-HD+ 100, R 37 HD+ 100 operating instructions Rotating the TV set

Operating additional equipment

Rotating the TV set

Your TV set has a connection for a rotating stand control. If the set is mounted on a motorised Loewe stand, you can use the remote control to adjust it to your seating location accordingly.

➠A motor unit is connected.

➠In normal TV mode, without other displays.

34Rotate the TV set.

Do not place any objects in the rotation range of the TV set that could obstruct the rotation or that could be knocked over by the rotation movement.

Setting the range of rotation

You can specify the rotation range of the TV device (maximum +/- 40 degrees) by setting the maximum right and left stop position.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Rotate TV,

6go to the menu line below.

34Select Basic adjustment, OK calls the basic adjustment.

Rotate TV
Basic adjustment (right)	END
21
OK Proceed

4Basic adjustment (right)

Turn your TV set as far to the right as the installation position of your set allows. This will be the maximum right rotation position in future.

OK confirms basic adjustment to right.

Rotate TV
Basic adjustment (left)	END
-30
OK End of basic adjustment

3Basic adjustment (left)

Turn your TV set as far to the left as the installation position of your set allows. This will be the maximum left rotation position in future.

OK ends the basic adjustment. Close the menu.

Specifying the switch off position

This is where you specify the position that the TV will take when it is switched off. In order for the TV set to return to the determined switch-off position when switching it off, this must be activated (see below).

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Rotate TV,

6go to the menu line below.

34Select Set switch-off position, OK calls Set switch-off position.

TV menu

Settings

Miscellaneous

Rotate TV

Set switch-off position INFO END

0

OK Adopt

34Set desired switch-off position. The TV set rotates in the process.

OK Save the set position as the switch-off position. Close the menu.

Activating the switch-off position

Call TV menu. 34Select Settings,

6 go to the menu line below.

34Select Miscellaneous,

6go to the menu line below.

34Select Rotate TV,

6go to the menu line below.

34Select Activate switch-off position,

6go to the menu line below.

34Select yes.

Close the menu.

If the TV set is switched off with the on/off key on the remote control or with the switch integrated in the display then it will turn to the defined switch-off position. When it is switched back on, it returns to the position last set.

- 64