LSI 25083 manual Connecting the SAS 9260-8i RAID Controller to a Drive

Step 2. Plug the HDD connector on the other end of the internal cable into the connector on the SAS drive or the SATA II drive.

Step 3. If you have another drive, connect it to another plug on the internal cable.

You can connect other devices if the cable has more connectors.

Figure 2.5 Connecting the SAS 9260-8i RAID Controller to a Drive

HDD

Connector

Power

Connector

85039-06

2.5.2Connecting the SAS RAID Controller with External Connectors to a Drive Enclosure

This section provides step-by-step instructions for connecting a SAS RAID controller with external SAS port connectors to a drive enclosure containing SAS drives, SATA II drives, or a combination of both drive types.

2-10	MegaRAID SAS Hardware Installation
	Copyright © 2009 by LSI Corporation. All rights reserved.