The MegaRAID SAS 9260-8i low-profile SAS/SATA II RAID controller controls eight internal SAS/SATA ports through two SFF-8087 x4 internal mini SAS connectors.

The MegaRAID SAS 9260DE-8i low-profile SAS/SATA II RAID controller controls eight internal SAS/SATA ports through two SFF-8087 x4 internal mini SAS connectors and offers data security using disk encryption.

Note: The SAS 9260-4i RAID controller does not contain the JT7 connector, which supports ports 4–7. The SAS 9260DE-8i has the same connectors as the SAS 9260-8i.

This subsection provides the board layout, and connector and jumper information for the RAID controller. Figure 3.2 shows the jumpers and connectors on the SAS 9260-8i RAID controller.

Figure 3.2 Card Layout for the MegaRAID SAS 9260-8i RAID Controller

JT12

JT13

JT10

 

 

 

 

 

 

 

 

JT7

 

JT6

JT9

 

Port

 

 

Port

 

7-4

 

 

3-0

 

JT11

 

 

 

 

 

 

JT8

85039-04

JT2

JT4 JT1

JT3

Note: JT1, JT2, and JT4 are behind the LSIiBBU07 when the iBBU is installed, but they are still accessible.

Table 3.2 describes the jumpers and connectors on the SAS 9260-8i and 9260DE-8i RAID controllers.

3-4

MegaRAID SAS RAID Controller Characteristics

 

Copyright © 2009 by LSI Corporation. All rights reserved.

Page 54
Image 54
LSI 25083 manual Card Layout for the MegaRAID SAS 9260-8i RAID Controller