LSI 25083 manual To Drive Enclosure Mini SAS Cable Plug Connector

Follow these steps to connect the cable from your controller to a drive enclosure.

Note: The SAS 9280-8e RAID controller is shown as an example. You can connect other SAS controllers with external SAS port connectors in the same way.

Step 1. Connect the connector on one end of the cable to external port J1A4 or J1B1 on the SAS 9280-8e RAID controller, as shown in Figure 2.6.

Step 2. Connect the other end of the cable to the external port on the drive enclosure.

Figure 2.6 Connecting the SAS 9280-8e RAID Controller to a Drive Enclosure

To Drive Enclosure

Mini SAS x4

Cable Plug

Connector

85040-10

iBBU (Top View)

LSI
ReplaceCaution:31503-
Dispose owithf	00
uDanger of			Rev.
sedsameb or
	atteriesexplosion
				B
		equivalent if
				typebattery		is
			ccordingto				ASSEMBLEDWWYYN0000IN
				recommendedincorrectly				replaced.
					anufacturer'si
								USA.
							by
							nstructionsmanufacturer. .

e1 Pb

SAS Device Cables and Connectors 2-11

Copyright © 2009 by LSI Corporation. All rights reserved.