Cluster Service Software Installation

Before you begin the Cluster Service Software installation on the first node, make sure that all other nodes are either powered down or stopped and that all shared storage devices are powered on.

Cluster Configuration Wizard To create the cluster, you must provide the cluster information. The Cluster Configuration Wizard will allow you to input this information.

Step

Description

1

Click on Start.

2

Click on Settings, then click on Control Panel.

3

Double-click on Add/Remove Programs.

4

Double-click on Add/Remove Windows Components. The following window displays.

 

 

5

Select Cluster Service, then click on Next.

6

Cluster Service files are located on the Windows 2000 Advanced Server or Windows

 

2000 Datacenter Server CD-ROM.

 

Enter x:\i386 (where x is the drive letter of your CD-ROM). If you installed Windows

 

2000 from a network, enter the appropriate network path instead. (If the Windows 2000

 

Setup flashscreen displays, close it.)

7

Click on OK. The following screen displays.

86MegaRAID Express 500 Hardware Guide