Configuring Cluster Disks, Continued
Use the following procedure to configure the clustered disks.
Step | Description |
1The Add or Remove Managed Disks dialog box specifies disks on the shared SCSI bus that will be used by Cluster Service. Add or remove disks as necessary, then click on Next.
2The following screen displays. Click on Next in the Configure Cluster Networks dialog box.
3Verify that the network name and IP address correspond to the network interface for the public network.
4Check the box Enable this network for cluster use.
5Select the option All communications (mixed network), as shown below, and click on
90MegaRAID Express 500 Hardware Guide