DOS ASPI Driver Error Messages
| Message |
| Corrective Action |
|
LSI Logic ASPI Manager has | The ASPI manager is not loaded. One of the failure |
| ||
NOT been loaded. | codes listed below is displayed next. |
| ||
Controller setup FAILED | Correct the condition that caused the failure. The failure |
| ||
error code=[0xab] | codes are: |
| ||
|
| 0x40 | No MegaRAID adapters found |
|
|
| 0x80 | Timed out waiting for interrupt to be posted |
|
|
| 0x81 | Timed out waiting for MegaRAID Express |
|
|
|
| 500 Response command. |
|
|
| 0x82 | Invalid command completion count. |
|
|
| 0x83 | Invalid completion status received. |
|
|
| 0x84 | Invalid command ID received. |
|
|
| 0x85 | No MegaRAID Express adapters found or no |
|
|
|
| PCI BIOS support. |
|
|
| 0x90 | Unknown Setup completion error |
|
No | The driver did not find any |
| ||
located | during scanning. A SCSI device that is not a hard disk |
| ||
|
| drive, such as a tape drive or |
| |
|
| attached to this SCSI channel. The SCSI ID must be |
| |
|
| unique for each adapter and cannot be SCSI ID 0. The |
| |
|
| supported SCSI IDs are 1, 2, 3, 4, 5, and 6. |
| |
'ERROR: VDS support is | The /h option is appended to driver in |
| ||
*INACTIVE* for | CONFIG.SYS or this driver is used with a BIOS that is |
| ||
MegaRAID Express logical | earlier than v1.10, or no logical drives are configured. |
| ||
drives |
|
|
| |
|
|
|
|
|
104MegaRAID Express 500 Hardware Guide