1 Overview

 

The MegaRAID® Express 500 PCI RAID controller is a high performance intelligent

 

PCI-to-SCSI host adapter with RAID control capabilities. The MegaRAID Express 500

 

provides reliability, high performance, and fault-tolerant disk subsystem management.

 

The MegaRAID Express 500 is part of the LSI Logic Intel i960RM/RS-based MegaRAID

 

controller family. The MegaRAID Express 500 is an entry level-to mid-range RAID

 

controller solution. MegaRAID Express 500 offers a cost-effective way to implement

 

RAID in a server.

 

The MegaRAID Express 500 has a 160M Ultra and Wide SCSI channel supporting data

 

transfer rates up to 160 megabytes per second (MB/s) per channel. The SCSI channel

 

supports up to fifteen non-Ultra SCSI devices. MegaRAID Express 500 includes

 

MegaRAID features and performance.

Features

MegaRAID Express 500:

 

• provides a high performance I/O migration path while preserving existing PCI-SCSI software

 

• performs SCSI data transfers up to 160 MB/s

 

• performs synchronous operation on a wide LVD SCSI bus

 

• allows up to 15 LVD SCSI devices on the wide bus

 

• includes an Intel® i960RM that performs RAID calculations and routing

 

• supports 8, 16, 32, 64, or 128 MB of SDRAM cache memory in a DIMM socket used for read

 

and write-back caching and RAID 5 parity generation

SCSI Channel

The MegaRAID Express 500 upgrade card includes one Ultra3 SCSI channel. The

 

channel is powered by a Q-Logic ISP10160A 160M SCSI processor.

NVRAM and Flash ROM A 32 KB x 8 NVRAM stores RAID system configuration information. The MegaRAID Express 500 firmware is stored in flash ROM for easy upgrade.

SCSI Connectors MegaRAID Express 500 has one ultra high density 68-pin external connector for external storage subsystem and one high density 68-pin internal connector.

Chapter 1 Overview

1