Step 12 Install Operating System Driver, Continued
The MEGASPI.SYS ASPI manager must be added to the CONFIG.SYS file before you can install the
C:drive. Add the following line to CONFIG.SYS, making sure it is preceded by the line for MEGASPI.SYS:
DEVICE=C:\AMICDROM.SYS
Add the following to AUTOEXEC.BAT. Make sure it precedes the SMARTDRV.EXE line.
MSCDEX /D:MSCD001
MSCDEX is the
MSCDEX.
Summary
This chapter discussed hardware installation. Configure the RAID system via software configuration utilities. See the MegaRAID Configuration Software Guide for all information about MegaRAID Express 500 software utilities. The utility programs for configuring MegaRAID Express 500 are:
Configuration Utility | Operating System |
|
MegaRAID BIOS Setup | independent of the operating system |
|
MegaRAID Manager | DOS |
|
| Linux Red Hat 6.x |
|
| OS/2 2.x, OS/2 Warp |
|
| SCO UNIX SVR3.2 |
|
| SCO UnixWare |
|
| Novell NetWare 3.x, 4.x |
|
Power Console 500 | Microsoft Windows NT |
|
| Windows 95 |
|
|
|
|
66MegaRAID Express 500 Hardware Guide