Checking the Modem Settings
5.Choose the following settings: Connector=Com1 Baud Rate=9600 Data Bits=8
Stop Bits=1 nParity=None
Flow Control=None
6.Click the OK button to save the changes. If you are using the 8400B data module, continue to step 7. For the 7400B data module, skip to step 10.
7.Type ats24=001 to set the data module for standalone operation without a telephone.
8.Remove power from the 8400B data module for 5 seconds.
9.Reconnect power to the 8400B data module. The red LED comes on steady.
10.Type at and press Enter. The OK prompt appears. Type atdt and the dial number you recorded earlier. Press Enter. The login prompt appears.
Figure 9. Connection Description Window
Issue 1 CRCS R6.0 April 1999 13
