Lucent Technologies 6 manual Appendix A: Modem Pooling, Administering Modem Pool Groups

Appendix A: Modem Pooling

Appendix A: Modem Pooling

Administering Modem Pool Groups

The commands in the following table are used to access the Modem Pool Groups form:

Table 1. Modem Pool Groups Command

Action	Object	Qualifier
add	modem-pool num	1 to maximum
change	modem-pool num	1 to maximum
display	modem-pool num	1 to maximum,
		print or schedule
list	modem-pool num	print or remove
remove	modem-pool num	1 to maximum

Qualifier “maximum” is the maximum number available in your system configuration.

To change information associated with modem pool groups, follow these steps:

1.From the MCU MT, at the command prompt enter change modem-pool num.

2.Verify the screen displays the Modem Pool Groups form.

3.Use TAB and RETURN to advance to the fields you want to change.

4.Submit the form.

5.To verify the form, enter display modem-poolnum.

44 Issue 1 CRCS R6.0 April 1999