Lucent Technologies 6 manual OpCenterSP Installation, Loading OpCenterSP Software

OpCenterSP Installation

OpCenterSP Installation

NOTE:

If your system encounters a conflict with another application while running setup, make sure all other Windows applications are closed before pro- ceeding. If no other program is running when a conflict is reported, remove OpCenterSP and related programs, including Link Manager, from your Windows Startup group and reboot your PC before trying setup again.

1.Setup your OpCenterSP PC as described under "Pre-Installation Require- ments" on page 5 and configure the PC according to "Configuring the PC" on page 7.

2.Complete the OpCenterSP PC to MCU connections as described in "Con- necting the PC to the MCU" on page 9 by connecting the power cord and plug, inserting the mouse cord in an available COM port or installing the bus mouse, and turning on the power.

Figure 30. Loading OpCenterSP Software

3.Insert the CRCS CD-ROM.

4.From the Windows desktop, click Start— Run....

5.From the Run window, click Browse to locate the CRCS CD-ROM setup program or type the letter assigned to the CD-ROM driver followed by a colon (:), a backslash (\), and the word setup.exe. For example: g:\setup.exe would be the entry if the CRCS CD-ROM was inserted in drive g. Click OK.

38 Issue 1 CRCS R6.0 April 1999