Adding a Test Conference
Testing OpCenter
To test the OpCenter connection, follow these steps:
1.If the Login window is not already displayed, select Start— Lucent Tech- nologies CRCS— Conference Scheduler.
2.From the CRCS Login window, click Login.
3.Enter your login name and password.
4.Click OK.
5.Schedule a test conference to begin immediately and make sure that it downloads to the MCU.
6.From the OpCenter menu on the Main window, select Show.
7.Choose MCU1 or MCU 2 from the
8.From the MCU Status Board, check to see if the conference appears.
9.Right click on the conference to display the
10.Select Details to display the Conference Details window.
11.Confirm the test conference settings, bandwidth, convener, sites, etc.
12.Close the Conference Details window and MCU Status Board by clicking the x on the right side of the title bar.
Figure 26. Testing OpCenter—MCU Status Board
Issue 1 CRCS R6.0 April 1999 31
