Testing CRCS
Setting the Time Zone
1.Login as an administrator.
2.The time zone where the CRCS PC is located is Local. If the CRCS con- trols an MCU that is not geographically located in the same time zone, you must perform the following steps; otherwise skip to step 3:
Select Time Zone Template from the View menu.
nFrom the Time Zone Template View window, click .
From the Add Time Zone Template window, enter a name for the time zone where the MCU is geographically located. Typically, you would enter the common name for the time zone such as Eastern, Mountain, or Central.
Figure 16. Selecting thenTime Zone
In the Time Zone Offset section, enter the amount of time in hours that the Local time (where the CRCS PC is located) is ahead or behind the time where the MCU is located. For example, if the CRCS PC is in New Jersey and the MCU is in California, the Offset
nis 3 hours Behind CRCS Time.
Under the Daylight Savings Increment, specify if the time zone where the MCU is located follows Daylight Savings time changes
nand if so, the dates when Daylight Savings starts and ends. Click OK to save the new time zone setting.
20 Issue 1 CRCS R6.0 April 1999