Faxmodem Installation
Faxmodem Installation
To use CRCS fax options, one or more faxmodems must be properly installed and configured. The type of faxmodem recommended by Lucent Technologies depends on operating system used for
When installing a faxmodem on a CRCS PC that manages two MCUs, connect to COM3 or COM4. This requires either an internal modem or an external modem
Windows 95
The following faxmodem recommendations are for Microsoft Windows 95 sys- tems:
nUS Robotics Sportster 33.6 Faxmodem (internal or external)
Puredata SatisFAXtion 400/400e Faxmodem (only recommended for upgrades of CRCS)
Windows NT 4.0
The following faxmodem recommendations are for Microsoft Windows NT 4.0 sys- tems:
US Robotics Sportster 33.6 Faxmodem (internal or external)
nZoom Faxmodem VFX28.8 (only recommended for upgrades of CRCS) Multitech MT1932ZDX (only recommended for upgrades of CRCS)
NOTE:
Lucent Technologies recommends the US Robotics Sportster 33.6 Faxmo- dem for all new CRCS installations regardless of platform. However, if you have one of the other faxmodems installed from a previous release of CRCS, you may use it with CRCS 6.0. Follow the instructions in the previ- ous CRCS Installation manual for instructions on installing the Puredata SatisFAXtion faxmodem. For all the other modems, follow the manufac- turer’s instructions to install.
32 Issue 1 CRCS R6.0 April 1999
