Using the Display, Softkeys and Display
Control Buttons
If you are using an 8411D voice terminal (which has a display), the following information will help you use the display, the softkeys, and the display control buttons.
The softkeys are the four keys labeled with arrows ( | ) located directly below | |||||||
the display. The four display control buttons, labeled | Menu | , | Exit | , | Prev | , | ||
and |
| are located under the softkeys. Figure 4 shows the location of the softkeys in | ||||||
Next | ||||||||
relation to the display above the softkeys and the display control buttons below them.
|
|
| 8411D |
Menu | Exit | Prev | Next |
Display
Softkeys
Display control buttons
Figure 4. The Display, Softkeys, and Display Control Buttons
Entering Softkey Mode and Viewing the Three Feature Option Screens
There are three separate feature option screens. Each of these screens allows you to select from four different features.
You can enter Softkey Mode by pressing the display option button labeled is an example of a feature option screen.
Menu
. The following
LWC CnLWC AutCB Timer
The top line of each feature option screen shows you the status of each of the four features. An arrow appears above the feature name or abbreviation if that feature is active. If there is no arrow above the feature, the feature is not active. In the above example, the Automatic Callback feature is active because there is an arrow above that feature abbreviation.
Note: If the feature requires you to dial a telephone number or extension, such as Call Forwarding, you will temporarily see the digits you are dialing, rather than the arrow, above the feature name.
16
