Lucent Technologies 8411 manual Test/Diagnostics, Transfer

Test/Diagnostics

✔

To test the lights and the	1 While on-hook or off-hook, press and hold					Test
display on your voice terminal	• Red light next to
		Test	goes on
	Note: If the red light next to				flashes rather than
				Test
	goes on steadily, it means that the voice terminal is not
	communicating with the PBX. In such a case, see your
	system manager.
	• The lights go on steadily in two groups, and, if your 8411
	has a display, all the display segments fill in

To perform a diagnostics test of the PassageWay connection and the status of the Analog Adjunct (if either of these is connected to your 8411 set)

2To end test, release Test

•Lights return to pretest state; red light next to Test goes off

Note: If the display or the lights do not respond during the test, notify your system manager.

1 Press Shift

2Press Test

•The red and green lights go on next to Buttons #9 and/or #10 to indicate the status of these two functions. For more information on the meaning of the PassageWay and Analog Adjunct lights, see “PassageWay and Analog Adjunct Status Indications.”

Note: If you press any voice terminal buttons or if you receive or place a call during the diagnostics test, the test is terminated and the voice terminal returns to Normal Mode.

Transfer

✔

41