Exit (Normal)
✔
To exit any display feature | 1 Press | Exit |
| |
and return to Normal (call- | • Display will show call information for active | |||
handling) Mode display | ||||
call appearance | ||||
| ||||
Inspect
You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, Inspt, appears on the second line of one
of the feature option screens.
Note: If you are currently on a call and a new call comes in, the display automatically shows you information on the new call. You do not need to use the Inspect feature in this situation. However, you can use the Inspect feature to see who’s on a call that has been placed on hold.
To see who’s on hold | 1 Press | Menu | and then press the softkey below Inspt | ||
while on a call | or, if Inspt is not available on your display, | ||||
| |||||
| press |
|
|
| |
|
| Inspect | |||
2Press
xxxxx
of held call
•Information is shown on display screen; you remain connected to present call
3 To return to held call, press Exit and xxxxx held call
of
45
