Lucent Technologies 8411 manual Three Default Feature Option Screens

The second line on each feature option screen shows the features you can access. To use any of these features, you must press the softkey below the feature name or abbreviation. For example, on the feature option screen shown above, you can leave a message for another extension to call you back by pressing the softkey below LWC (the Leave Word Calling feature). If you want to cancel the message, press the softkey below CnLWC (the Cancel Leave Word Calling feature).

To see the next set of four features, press the display control button labeled Next ; to move

back a screen, press the display control button labeled Prev . Press Next or Prev until the feature you want to use appears on the second line.

The following flowchart (Figure 5) shows the default features for the three feature option screens. These are the 12 softkey features available when the voice terminal (with display) is shipped from the factory. Also, see “Other Softkey Features That May Be On Your Display” in this section.

LWC CnLWC

AutCB

Timer

CFrwd CPark

TmDay PCall

Cancel

Timer

LWC

Prog

Pause

Mark

Wait

Leave

Automatic

Word

Callback

Call

Priority

Calling

Park

Calling

Call

Time/

Forwarding

Date

AD

AD

Pause

Wait

Abbreviated

AD

Dialing (AD)

Mark

Program

Figure 5. The Three Default Feature Option Screens

Note:

Press

An error tone (one beep) sounds when you have made a mistake in your softkey entries. Exit at any time to exit softkey mode and return to Normal (call-handling) Mode.

17