Lucent Technologies 8411 manual Mute, Priority Calling

Mute

✔

Note: When you are talking on the handset, the Mute feature affects the microphone associated with the handset rather than the speakerphone.

This feature has no effect on an external speakerphone attached to your voice terminal.

To prevent the other	1 Press	Mute
party from hearing you (To	• Red light next to
mute the handset
	cannot hear you
or speakerphone microphone)

Mute

goes on and the other party

2When you are ready to resume conversation with the other party, press Mute again

•Red light next to Mute goes off and the other party can hear you again

Note: When the voice terminal is set for the Speaker (listen- only) feature, the light next to Mute goes on whenever you are using the speaker.

The Mute feature turns off automatically when you hang up, or switch from the speakerphone to the handset or from the handset to the speakerphone.

Priority Calling

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, PCall, appears on the second line of one of the feature option screens.

To place a priority call	1	If you are using an 8411 with a display, press			Menu	and then
(3-burst ring)		press the softkey below PCall
		(while on-hook or off-hook)
		If your 8411 does not have a display or if PCall is not
		available on your display, press	Priority
		(while on-hook or off-hook)
		or Dial Priority Calling access code __________
		(while on-hook or off-hook)			[dial tone]
	2	Dial the extension		[ringback tone]

•Wait for called party to answer

Note: If your call is not answered and you wish to redirect it to coverage, press Go to Cvr while call is ringing.

34