Lucent Technologies merlin legend communications system Understanding Your QCC, Call Buttons

Understanding Your QCC

Call and Fixed-Feature Buttons

The Call and fixed-feature buttons are factory-set and labeled for specific functions, as shown in the following illustration and described below.

Letters G through Z

Letters located on the corner of each Call and fixed-feature button are used to enter names into your

Personal Directory (see p. 17).					Fixed-Feature Buttons
Letters A through F appear on the					See p. 4 for details.
display.
	G Call 5		Position H			I	Alarm	Forced	J
		(Ring/Voice)	Busy					Release
	K		Send/	L		M Night		Pool	N
			Remove
		Call 4	Message				Service	Status
	O		Handset/	P		Q	Headset	Headset	R
		Call 3	Headset
			Mute				Status	Auto Ans
	S		Source	T		U			V
		Call 2				Destination		Join
	W		Start	X		Y	Release		Z
		Call 1						Cancel

Call Buttons

Buttons labeled Call 1 through Call 5 are used to make and receive inside and outside calls (see p. 10). If Voice Announce is enabled through system programming, use Call 5 to make Voice Announce calls to extensions. Voice Announce calls made to a QCC are received as ringing calls.

3