Lumens Technology DC170 user manual Would like to record videos, Setting continuous capture

4.Press [] or [] to the [Capture] menu.

5.Press [] to find [Image Quality].

6.Press [] or [] to select among [High/Medium/Low].

7.Press [Menu] to exit.

7.11.3Setting continuous capture

1.Press [MENU] on the remote control or control panel to enter the setting menu.

2.Press [], [], [], or [] to select [Setting].

3.Press [ENTER] key to enter.

4.Press [] or [] to the [Capture] menu.

5.Press [] to the [Capture Mode].

6.Press [] or [] to select [Timer].

7.Press [] to find [Capture Time]; Press [] or [] to set capture time.

8.Press [] to find [Capture Interval]; Press [] or [] to set interval time.

9.Press [MENU] to exit.

7.12I would like to record videos

<Note > Connect SD card to DC170 to start recording images.

7.12.1Recording motion images

<Remark> You may not be able to capture or record images when [Capture Mode] is set to [Disable].

Remote control:

1.Press [RECORD] on the remote control to start recording videos.

2.Record sounds with the built-in microphone of the control panel.

3.Press [RECORD] again to stop recording.

Control panel:

1.Press and hold [CAPTURE] for about 2 seconds to start recording videos.

2.Press [CAPTURE] again to stop recording.

7.12.2Setting the quality of captured images

1.Press [Menu] on the remote control or control panel to enter the setting menu.

2.Press [], [], [], or [] to select [Setting].

English - 27