Lyngdorf Audio DPA-1 instruction

13.Tuner

No function.

14.Channel -/+

Toggles down/up between inputs.

15. Volume Up/down

Increases or decreases the volume in the chosen direction.

16. Up / Down / Left / Right

In normal operation mode the Up/Down toggles between bypass and the available Focus and Global ﬁlters and the Left/Right toggles between neutral and the available voicings.

In menu mode they are used for navigation in the menu system. Pressing and holding down a key changes selected values fast.

17. Enter

Turns the DPA-1 On from stand-by mode with the last selected input and works as Enter in menu sys- tem.

18. No Function.

Page 11

Image 11

Contents

DPA-1 Page Table of Contents Serial Number Registration Operating VoltageUnpacking the DPA-1 Introduction Accessories Controls Front Panel Rear Panel Display IndicatorsPage Remote Control Page Connecting to sources and ampliﬁers Connecting the DPA-1 Using Main and Line outputs Navigating the Menu System Menu System This is an overview of the entire DPA-1 menu structure Menu Tree Voicing Introduction to RoomPerfectGlobal Listening Focus Listening RoomPerfect Guided Setup Setting the Measurement Volume Level Room Measurements Focus Measurement Adding more Room Measurements Calculation of Focus 1 and Global Filters Measure Room Pos Advanced OptionsMeasure Focus Pos RoomCorrection RoomKnowledge Disp. Brightness Display TimeoutVolume Disp. Timeo Display Max. Vol VolumeDef. Vol Input Sensitivity Input Name Advanced Setup Line Out Main OutMain Out Control Main Out Level Crossover Frequency Routing Filter Type Delay Firmware Versions Trigger SetupRemote Control Factory Reset RoomPerfect Troubleshooting Firmware Upgrading Cleaning and Maintenance Connectors Audio Technical Speciﬁcations Mechanical ProtectionMains Trigger Technical Assistance Voicing Curves Appendix

Lyngdorf Audio DPA-1 owner manual

Models: DPA-1