Lyngdorf Audio DPA-1 owner manual Front Panel, Controls

Front Panel

	DIGITAL
MUTE
	ANALOG
							MENU
						ENTER
DPA-1Digital Pre-Amplifier
1	2	3	4	5	6	7	8

Controls

The buttons/controls on the front panel of the DPA-1 can all be operated either with direct presses or by operating the corresponding keys on the supplied remote control. All the keys on the front panel (except the Mains Switch) are duplicated onto the remote control as well.

1.Mains Switch Powers the DPA-1 on/off.

2.Mute

Toggles Mute mode on/off.

Pressing the Mute button for 3 seconds will set the DPA-1 in stand-by mode.

3.Analog Input Selector

Changes to Analog input, or if already selected, cycles to the next Analog input. In standby mode, press to turn On the DPA-1 with the last selected analog input.

4.Digital Input Selector

Changes to Digital input, or if already selected, cycles to the next Digital input. In standby mode, press to turn On the DPA-1 with the last selected digital input.

5.Display

Display with all information on the menu system, status, active input selection and volume control.

6.Volume Wheel

Optical encoded volume control wheel.

7.Navigation Keys

In stand by mode, press Enter to turn On the DPA-1 with the last selected input.

In normal operation mode the Up/Down toggles between bypass and the available Focus and Global filters. The Left/Right keys toggles between neutral and the available voicings.

In menu mode the keys are used for navigation in the menu system: Up/Down, Left/Right & Enter. Press- ing and holding down the Up/Down, Right/Left keys, changes selected values fast.

8.Menu Button

Toggles Menu mode on/off

7