Operating Voltage
The
In 115V mode the
In 230V mode the
The mains voltage setting for your
Make sure the rear selector is in the correct setting and connect the power input only to the appropiate AC source. The warranty will not cover any damage caused by connecting to the wrong type of AC mains.
The
1.OFF
No circuitry is powered. Please note that some parts of the mains entry section still carry live mains.
2.STANDBY
The microprocessor is active.
3.ON
All circuits are active.
Unpacking the DPA-1
Carefully remove the unit and accessory kit from the carton, visually check for shipping damage. Contact both the shipper and your Lyngdorf Audio representative immediately if the unit bears any sign of damage from mishandeling. All Lyngdorf Audio equipment is carefully inspected before leaving our factory.
Keep shipping carton and packing material for future use or in the unlikely event that the unit needs servicing. If this unit is shipped without the original packing, damage could occur and void the warranty.
Serial Number Registration
Please record the serial number of your
4
