Lyngdorf Audio DPA-1 owner manual Remote Control

Remote Control

The remote control is used to access the menu system as well as the buttons directly accessible on the front panel. To control the DPA-1 the AMP key must be pressed (please note the DPA-1’s volume and mute buttons still work when in other modes).

The functionality of the buttons when AMP is pressed are as follows:

1.Standby

The standby button puts the DPA-1 in stand-by mode.

2.Numerical Buttons 1-8

Selects Focus listening mode (up to 8 different listening positions can be stored in RoomPerfect™).

3.Numerical Button 9 Selects global listening mode.

4.Digital

1

1 2 3

2

4 5 6

	7		8		9	3
4	digital		0		info	6
5
7	analog				menu	9
8
						12
10	AMP	RCS		CD	TUNER	13
11
14	channel			volume		15

Turns On the DPA-1 from stand-by mode in the last selected digital input.

Selects Digital input, or if already selected, cycles to the next Digital input. To select a specific Digital input, press the ‘Digital’ button fol- lowed by numerical button 1-5 within 2 seconds.

16

17

18

ENTER

5.Numerical Button 0

Selects bypass listening mode (no room correction filter selected).

6.Info

Hold down for 2 seconds to show the current samplerate.

To select a specific Voicing filter, press the ‘Info’ followed by numerical button 0-6 within 2 seconds.

7.Analog

Turns On the DPA-1 from stand-by mode with the last selected analog input.

Selects Analog input, or if already selected, cycles to the next Analog input. To select a specific Analog input, press the ‘Analog’ button fol- lowed by numerical button 1-4 within 2 seconds.

8.Mute

Toggles Mute function on/off.

9.Menu

Activates or de-activates the Menu system on the Main display.

10. AMP

Selects the remote for operation with a Lyngdorf Amplifier/Pre-amp.

11. RCS

Selects the remote for operation with a Lyngdorf Room Processor.

12. CD

Selects the remote for operation with a Lyngdorf CD Player.

A/B random repeat

10