M-Audio 52803 warranty Audio Ozone and the Windows Sound System, Macintosh Driver Installation

16. The final window tells you that installation is complete. Click “Finish”..

After a few more ‘automatic’ windows which do not require any action, the installation procedure reaches completion, and your device is ready to use.

M-Audio Ozone and the Windows Sound System

After installation, the M-Audio Ozone’s Windows Multimedia drivers will allow you to use the M-Audio Ozone as your Windows system sound device. If the M-Audio Ozone is the only audio device installed in your computer, then Windows will select it automatically. Otherwise, you may need to tell Windows to use the M-Audio Ozone.To check your Windows Audio setting and select the M-Audio Ozone:

1.Go to the Start menu, and then choose Control Panel (in Windows 98SE and Me, you will need to go to Start/Settings, in order to get to the Control Panel).

2.Open “Sounds and Audio Devices” (in Win 98SE, choose “Multimedia”), then click the “Audio” tab.

3.Under “Sound Playback,” the default device should say “Ozone.” If it does not, then drop down the list of devices and select “Ozone.”

4.Click “Apply,” then click “OK.” Close your Control Panel.

Macintosh Driver Installation

If you are using OS 9, you must first install Opcode’s OMS. OMS is a MIDI manager program that is made by Opcode and is required to run the M-Audio Ozone on the Macintosh in OS 9. OMS is available on the M- Audio Ozone drivers page of our website, or can be installed from the Driver CD.

Note: It is important that you install OMS before running the M-Audio Ozone Installer.

24