4.Assign the MIDI channel number on number key group
5.You can select up to five banks of presets for the
6.Finally, Press MIDI/SELECT key again to finish assigning values to the controller knob.
RESET Key: Pressing the MIDI/SELECT button, followed by the RESET key and then the Enter key, will send out a message to return all external MIDI instruments to their default setting. Press the MIDI/SELECT button again to complete the process.
Flat and Sharp Keys: By pressing the MIDI/SELECT button and the flat or the sharp key, you will shift the active keyboard pitch one note (half- step) higher, or lower. For example, if you want to change the pitch 2 notes down, press MIDI/SELECT button and the flat key twice. Press the MIDI/SELECT button to finish the change.
To change the
MIDI CHANNEL Select: Pressing the MIDI/SELECT button and then pressing the MIDI CHANNEL key allows you to select the transmitting channel for your keyboard. The default Channel is 1 when the keyboard’s power is turned on.To set the MIDI channel to 2, for example:
1.Press the MIDI/SELECT button.
2.Press the key labeled “MIDI CHANNEL,” on the keyboard.
3.Press the key labeled 2, on the keyboard, then press the key labeled “Enter,” also on the keyboard. Lastly, press the MIDI/SELECT button one more time (this will change the MIDI transmit channel from 1 to 2.)
Control Change Data Entry by Numeric Keypad:
1.Press the MIDI/SELECT button.
2.Press the CC No. key.
3.Press the key labeled 7.
4.Press the Enter key, in order to specify the Control Change as 7.
42
