15. Power Switch
This one is self-explanatory. When the POWER switch is turned ON, power is supplied to the Digital X Bus and it boots up. When turning off the Digital X Bus, you should select SHUTDOWN from the File menu. At the end of the shutdown procedure, the Digital X Bus lets you know when it is okay to turn off the power switch.
Before turning on your Digital X Bus, please read the “Power-up Procedure” section on page 55 of this manual for complete step-by-step instructions.
115V 9amp 60Hz
230V 4.5amp 50Hz 1100W Max
More ConnectionsThere are even more connections available behind the removable panel on the back of the Digital X Bus. Use a small-headed Phillips screwdriver to remove the ten screws securing the panel to the chassis to access these additional connections, which we call the Motherboard Access Area.
16. Mouse
This 6-pin miniDIN connector is used to connect a PS/2 style mouse.
17. Keyboard
This 6-pin miniDIN connector is used to connect a PS/2 style keyboard.
18. USB
These are four additional USB ports for connecting more USB devices to the Digital X Bus. If you are connecting a USB CD-ROM drive or a USB MIDI interface, use one of these ports rather than the USB ports on the rear panel (13).
19. Video Card
The video card has two connectors, one for each touchscreen. The upper connector is a VGA-type and connects to the left touchscreen, while the lower connector is a DVI-type and connects to the right touchscreen. You can use two video splitters to connect two external displays, if desired.
Note: The first production run of X.200s requires that the external monitors be rotated 180º because the video signal is upside down. While testing the touchscreen displays, we determined that the clarity was better at the required viewing angle if the touchscreen displays were mounted upside down. If you are using external flat-panel LCD or plasma displays, this is not a problem. However, conventional CRT-type displays generally will not work in this application.
Also note that the “touch” function does not work with an external display. This feature is built into the actual touchscreen displays on the Digital X Bus.
