•Using this list, it is possible to regress to any point in the mix. If at some point things went in the wrong direction, it is easy to go back to where the mix was on the right track.
•Highlight any item in the list to deactivate all forthcoming listed actions. When the mix is played, no actions listed below the selected event will occur.
•If an event is selected in the list and then a change is made in the Mix Editor, all events fol- lowing the selection will be replaced by the new event.
•Use the Undo command from the Edit menu (Ctrl+Z) to regress through the History List steps one at a time.
•Use the Clear History command from the Edit menu to remove all events from the History List. This action cannot be undone.
Clear History
•Removes all items from the History window.
•This action cannot be undone.Copy Mix To Bus
•Copies the current L/R mix to a pair of buses.
•Selections include Bus 1 and 2, Bus 3 and 4, Bus 5 and 6, or Bus 7 and 8.
•Check “Unassign from LR Mix” to remove the selected channels from the L/R Mix and copy to the selected bus pair.
The Channel Menu | Owner's | |
| ||
The Channel menu contains: |
| |
Channel Settings (Ctrl+B) |
| |
Channel Presets |
| |
Setup Groups (Ctrl+G) | Manual | |
Link Channels… (Ctrl+L) | ||
| ||
UnLink Channels (Ctrl+U) |
| |
Faders to Unity (Ctrl+]) |
| |
Faders to Off (Ctrl+[) |
| |
Adjust Channel Delay… |
| |
Reset Channel Delay… |
| |
Reset Selected Channels |
| |
Select Fader Bank (Alt+A) |
| |
Select All Faders (Alt+Shift+A) |
|
Channel Settings (Ctrl+B)
•Allows for quick and easy setting of global channel parameters.
•Change the channel name.
•Easily set groups.
•Solo isolate channels.
•Quickly set channel links.
Channel Presets
•Allows you to save and open preset channel parameter settings.
•Click New to create a new channel preset. Enter the new name using the keyboard or
Owner's Manual | 27 |