Digital X Bus

You can select multiple non-contiguous channels or parameters by pressing the Ctrl key on the keyboard (or on the console) while clicking on track names.

Pencil Tool (Hand Tool)

•Use this tool to enter new data nodes and to alter existing ones.

•The Pencil tool can create and move new or cur- rent automation nodes while time code is being received (on the fly editing—before or to the left of the current time) or while time code isn’t being received (at any point on the timeline).

Eraser Tool

•Use this tool to remove automation data. Click on a node to remove it.

Magnify Tool

•Use this tool to select specific data lengths and to expand the data time to fill the screen.

•Click and drag with the Magnify tool to zoom into a specific area.

•Hold the Ctrl key while in magnify mode to zoom out.

Auto Scroll

•The right pointing arrow button next to the Magnify tool toggles Auto Scroll on and off.

•You can toggle Auto Scroll while time code is running.

Nudge Arrows

•Click the Nudge Arrows button to open the NUDGE window.

•You can move, or nudge, a selected region by an amount indicated in the NUDGE window.

•You can select the nudge time (horizontal axis) for nudging a selected region left and right by entering a value in the box between the Left and Right buttons. Click the box to open the numeric entry window.

•You can select the nudge amount (vertical axis) for nudging a selected region up and down by entering a value in the box between the Up and Down buttons. Click the + and – buttons to change the nudge amount, or click the box to open the numeric entry window. You can enter a value from 1 to 100.

Delete, Cut, Copy, Paste Buttons

•These buttons perform the same editing func- tions that appear in the Mix Editor menu.

•The editing function are applied to a selected region, highlighted between the Edit In and Edit Out markers.

48 X.200