Faders to Off (Ctrl+[)

•Sets the selected channel faders to off.

•Affects faders only (including Master L/R faders). Does not affect any other channel parameters.

Adjust Channel Delay…

•This features provides a means to shift chan- nels in time, relative to each other.

•Select the channels that will remain at the original position; all unselected channels will be offset by the selected number of samples (±255).

•Use to compensate for phase and timing dis- crepancies in a synchronization scenario or any multitrack playback/record device setup.

•For example, if you place a plug-in with 100 samples of delay on a channel, the audio will be behind the rest of the channels by that amount. To compensate, you would select the channel, choose “Adjust Channel Delay” and enter a value of 100.

•The Channel Delay control appears in the As- sign window for the selected channel.

Select Fader Bank (Alt+A)

•Selects all 24 channels in the currently selected fader bank for clipboard, automation, and other operations pertaining to multiple channel modi- fications.

Select All Faders (Alt+Shift+A)

•Selects all 118 channels in five fader banks (not counting MIDI) for clipboard, automation, and other operations pertaining to multiple channel modifications.

The Options Menu

The Options menu contains:

Solo Latch

Automation

Transport

Meters

DAW Emulation Mode

Faders To Tape

Route to Bank

Bank to Outputs

Solo Latch

•When Solo Latch is selected (a checkmark ap- pears next to Solo Latch in the Options menu), you can solo more than one channel at a time.

•When Solo Latch is off, only one channel may be soloed at a time.

•You can manually solo more than one channel when Solo Latch is off by pressing the Shift key while soloing multiple channels.

Manual Owner's

Reset Channel Delay…

•This resets the delay to 0 ms on the selected channels.

•To reset all channels, Select All Faders (Alt+Shift+A), then select Reset Channel Delay.

Reset Selected Channels

•Resets the selected channels to their default settings (L/R assign, Level to Tape and Digital Trim to 0 dB, EQ on and flat, Auxes off, Pan centered, Fader off, Gate and Compressor off and at default settings).

Automation Submenu

Bypass

•Selecting this option mirrors the BYPASS but- ton on the console.

•When Bypass is selected, automation data is neither recorded nor played back.

•When Bypass is not selected, all write-selected parameter adjustments are written into automa- tion data and referenced to time code.

Trim

•Selecting Trim mirrors the TRIM button on the console.

•Sets all faders to unity position (when “Trim From Unity” is selected in the Windows < Auto- mation window) and assigns all parameter con- trols (except mutes) to globally add or subtract from existing settings and recorded moves.

Owner's Manual

29