Digital X Bus

Open File Manager

Install Packages…

•Gives you direct access to file management features such as copying or moving files and folders, deleting files, and creating new folders.

•Rename files.

•Allows you to copy and move files from the internal drive to an external drive for backup.

Note: The destination drive or folder must be opened and displaying its contents for proper placement to occur. You can't drag and drop files in the File Manager window. You must use the Move and Copy arrows.

Launch Executable (.EXE)

•Opens the Launch Installer window, which al- lows you to browse to an executable file (.exe), a link to an executable (.lnk), or installer file on the hard drive.

•Used to install 3rd-party plug-ins, run third party authorizer applications, or MIDI interface drivers.

24 X.200

•Opens the Package Installer window.

•Scans any attached USB peripheral for a Mackie-packaged installation file.

•Reports the status of all installers detected.

•Used for all Mackie-approved plug-in and soft- ware installations.

Shutdown (Ctrl+Q)

•Press Ctrl+Q on the keyboard, or touch File and then Shutdown.

•The Digital X Bus asks you if you want to save the current session before shutting down. Select “Yes” to save the session, “No” to continue shut- ting down without saving the session, or “Can- cel” to continue working in the current session.

•In the Shutdown window, select “Shutdown” to close the Digital X Bus software, “Restart” to reboot the operating system, or “Cancel” to continue working in the current session.

•After shutting down, you will notice the mixer will turn off and the screens will shut off. Once that has happened, you need to turn off the power switch on the Digital X Bus. You must turn the switch to the off position before you can turn it back on to restart the console.