Store

MORPH

•To reassign an existing locate point, select the locate point, then touch the Store button to re- assign the locate point to the current time code position.

Locate To

•To move to a locate point, select the locate point and touch Locate To.

•You can also double-click on the locate point number to move the timeline cursor to the locate point position.

Equalizer (Ctrl+4)

This opens the Equalizer window for the selected channel.

ON Button

•This is an On/Off button, located at the top of the Equalizer window. It works as an EQ bypass switch, so you can easily make an A/B compari- son of the sound with and without EQ.

Memory A/B

•Each memory stores the most recent EQ set- tings made for the selected channel.

•Click either of these buttons to instantly recall the stored settings.

•Ideal for making quick A/B comparisons be- tween EQ settings.

•Click the MORPH button to smoothly fade from one memory setting to the other (Memory A and B).

•The amount of time it takes for this transition is set in the time window next to the MORPH button.

•Morph time can be set as low as 0.1 second or as high as 30 seconds.

MENU

•Click the MENU button to Cut, Copy, and Paste the EQ settings to and from the clipboard.

•Select Reset to return all the EQ controls to their default settings.

•Select EQ Presets to open the EQ Presets window. Here you can save or load preset EQ settings from the presets directory.

Each band of the 4-band EQ has:

•An On/Off button for the individual band.

•EQ Type Select: Click on the EQ type pop-up box to select from Low Shelf, High Shelf, Peak- ing, Low Pass, and High Pass.

•Gain, Freq, and Q controls. These are adjusted using the V-Pots just below the controls on- screen. Note that when High Pass or Low Pass are selected, the Gain control has no effect.

Manual Owner's

Owner's Manual

39