Digital X Bus

58. SET

•To move the timeline cursor to a new position in the Mix Editor, with LOCATE [57] lit, press SET, then enter the time you want to move the cursor to using the number buttons, then press ENTER [49].

Transport Controls

These buttons control external devices that respond to MIDI Machine Control (MMC). MMC is transmitted from the MIDI OUT port on the rear panel of the Digital X Bus to MMC-compatible devices.

Transport controls can be programmed to export specific MIDI messages other than standard MMC protocol. See MIDI Mapping for more details.

Note: MMC is not bidirectional. The Digital X Bus sends out MMC commands to your tape recorder(s), but if you arm tracks or operate transport controls from the tape recorders, the activity is not transmitted back to the Digital X Bus via MMC. You can, however, press Play on your recorder and, as soon as time code is received, the Digital X Bus reverts to PLAY mode.

59.REWIND

•Engages external machine and the time code display to fast rewind.

60.FAST FWD

•Engages external machine and the time code display to fast forward.

61.STOP

•Stops external machines and the time code display at the current position.

62.PLAY

•Engages external machine and time code dis- play to play at normal speed from the current location.

63.RECORD

•Engages Master record function on external machines.

•Must be pressed with PLAY to engage record mode unless One Button Record is active. One Button Record allows punching into record mode without hitting PLAY (see Windows > Setup > Mix Options).

64.SCRUB

•Engages the jog wheel to advance external ma- chines forward or backward with single-frame accuracy when using MMC.

EDIT

7

8

9

LOOP

START

START

 

 

 

END

4

5

6

STOP

SNAP

1

2

3

ON

SHOT

 

 

 

 

LOCATE

STORE

0

SET

ENTER

REWIND

FAST FWD

STOP

PLAY

RECORD

SCRUB

20 X.200