Digital X Bus

Floating Insert Send

•Click the Floating Insert Send drop-down box to select where to send the channel’s floating insert send. You can use any I/O card’s output. Typically, you would use this to send the signal to an external processor, and return the signal to the channel using the Floating Insert Return.

Floating Insert Return

•Click the Floating Insert Return drop-down box to select where to return the floating insert signal. You can use any I/O card’s input.

Phase Reverse

•Click the Phase Reverse button to invert the polarity of the signal by 180º.

Digital Trim

•The Digital Trim allows you to adjust the input level just after the A/D converter and before the channel DSP.

•Provides a method to trim the input signal when using Digital I/O cards.

Delay

•Adds delay to the selected channel. Ranges from 0 ms to 500 ms. This can be manually ad- justed with the V-Pot, or automatically adjusted when using the “Adjust Channel Delay” feature (Channel > Adjust Channel Delay).

Bus Assigns

•Click the Bus Assigns buttons to assign the output of the channel strip to Bus 1-8 and the L-R bus.

44 X.200