11.2. fun-Link (HDMI CEC)

HOME

A

“Settings”

A

“HDMI”

A “fun-Link (HDMI CEC)”

fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may not work properly depending on the device connected to the unit. When “fun-Link (HDMI CEC)” setting is set to “On” the functions listed below will be available.

„One Touch Play

When the buttons below on the remote control are pressed then operations are performed on this unit, the TV will automatically be Turned On and switched to the appropriate video Source Input.

Buttons for one touch play:

-[ (PLAY)], [ (SKIP)], [ (SKIP)], [the NUMBER buttons], [HOME]

-[TOP MENU], or [POP MENU/MENU] (when a disc is inserted in the unit)

„One Touch Standby

When you press and hold [(POWER-ON)]for 2 seconds, it turns Off the TV first and then Turns Off the power on this unit. When the connected fun-Link (HDMI CEC) compatible display device is Turned Off first, it then Turns Off the power to this unit.

When the connected fun-Link (HDMI CEC) compatible display device is Turned Off first, it then Turns Off the power to this unit.

„System Information

Get & Set Menu Language

The unit recognizes the OSD language set on the TV and automatically sets the same language as the Player Menu Language (OSD menu language) for this unit. “Language” under “Playback” on page 36 for available languages.

Feature is available only when “Auto” is selected in the Setup Menu “Language” section in “Settings” while connected via an HDMI cable.

11.3. HDMI Video Resolution

HOME

A

“Settings”

A

“HDMI”

A “Video Resolution”

Set the resolution of the video signal being output from the HDMI OUT jack.

You can select the desired “Video Resolution” among the settings listed below: “Auto”,“480p”. Actual Output Resolution:

Setting in the

 

 

Source

 

 

Video Resolution

480i/60

720p/60

1080i/60

720p/24

1080p/24

Auto

The highest resolution supported by your display device will automatically be in effect.

480p

 

 

480p/60

 

 

Composite video output (VIDEO OUT) jack can only output 480i/60.

For AVCHD, outputting the video in 24 frames per second (1080p/24) is not available.

DNote

The selected resolution must also be supported by your display device.

If your TV and the unit are connected by a DVI cable and if “Auto” is selected, “480p” will be automatically in effect.

Refer also to your TV’s manual.

When connected to an HDCP incompatible display device, the picture will not be displayed properly.

The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit length) may be limited by the connected device.

Among the display devices that support HDMI, some do not support audio output (for example, projectors). While connected to a device such as a projector, audio will not be output from the HDMI OUT jack.

When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-DVI converter cable, the signals are output in digital RGB.

HDMI video resolution does not work during the playback of a BD-video.

continued on next page EN - 43

EN

Page 43
Image 43
Magnavox MBP5320 owner manual Fun-Link Hdmi CEC, Hdmi Video Resolution, „ One Touch Play, „ One Touch Standby