Magnavox MRD500VR Connecting the System to a TV that has an S-Video In jack, Video Cable

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 13

Hookups (cont’d) 13

Connecting the System to a TV that has an S-Video In jack

Antenna

or Cable TV

Signal

S-VIDEO IN

RIGHT AUDIO IN

LEFT AUDIO IN

Back of TV (example only)

S-Video Cable

red/white Audio Cables

OUT IN

TV ANTENNA	COMPONENT
VIDEO R AUDIO L	VIDEO OUT

DVD/	Y
VCR
OUT
VCR	Pb/Cb
IN
	Pr/Cr
S-VIDEO	DIGITAL
	AUDIO OUT
OUT	COAXIAL
P	I PROGRESSIVE

	AM
ANTENNA 75Ω	ANTENNA 75Ω

FM

(75Ω)

1 Connect the antenna or Cable TV signal to the System’s TV ANTENNA IN jack.

2 Connect the supplied red/white audio cables to the System’s red/white AUDIO (DVD/VCR OUT) jacks and to the TV’s AUDIO IN jacks. Match cable colors to jack colors.

3 Connect an S-Video cable to the System’s S-VIDEO OUT jack and to the S-VIDEO IN jack on the TV. S-Video only supplies a DVD picture.To use the VCR or view TV channels, connect the RF coaxial cable or the yellow video cable. To use the RF coaxial cable, see step 2 on page eight.To use the yellow video cable, see step 3 on page 11. If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at the TV. If you are using the yellow video cable, choose the Video In channel at your TV.

4 Set the P/I PROGRESSIVE switch on the rear of the System to I (Interlace).

5 You are ready to connect the AM and FM antennas and the Speakers. Go to pages 16-17 to connect these items.

6 When all connections are complete, connect the power cords of the System and TV to a power outlet.Turn on the TV and set it to the S-Video In channel for DVD Player features. To help you find the right S-Video In channel, turn on the System. Press DVD to put the System in DVD mode.With no Disc in the Player, a large DVD logo will appear on the TV screen when you get the TV on the S-Video In channel. Go to your lowest TV channel (01 or 02) and change channels down until you see the DVD logo on the TV screen.

7 If you have not turned on the System already, go to page 19 to complete the VCR’s First-Time Setup. This process sets up the TV channels and the language for the VCR menu.

8 Set DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are on page 72. Playing a DVD when the settings are wrong could distort the sound or damage the speakers.