Magnavox MRD500VR Speaker Setup, Connecting the speaker wires to the speaker jacks, Helpful Hints

Models: MRD500VR

1 84
Download 84 pages 37.73 Kb
Page 17
Image 17
Connecting the speaker wires to the speaker jacks

Connecting the speaker wires to the speaker jacks

1 Connect the supplied speakers using the supplied speaker wires. Match the colors of the wires to the colors on the jacks.

Hold down the jack tab while inserting the stripped portion of the speaker wire into the jack.Then, release the tab. Make sure you do not insert the wire too far. None of the rubber-coated wire should be clamped by the jack tab.

Speaker Setup 17

Front

 

Center Speaker

Front

Speaker

 

Speaker

(right)

Subwoofer

 

(left)

Rear Speaker

 

 

Rear Speaker

(right surround)

 

 

 

 

(left surround)

 

 

 

 

 

FL (Front Left - white)

 

 

 

FR (Front Right - red)

 

 

 

C (Center - green)

 

 

 

SL (Surround/Rear Left - blue)

 

 

 

SR (Surround/Rear Right - grey)

 

 

 

W (Subwoofer - purple)

 

P

I

FL

FR

C

SL

SR

W

SPEAKER (4)

Setting up Surround Sound

Connect all the speakers and set up the System properly in order to enjoy the Home Cinema experience.

 

Place the FRONT Left and Right speakers at equal distances

1 position.from the TV and at a 45-degree angle from the listening

 

Place the CENTER speaker above or below the TV to localize

2 the sound.

 

 

 

 

Place the REAR (Surround) speakers at normal listening ear

 

level, facing each other or mounted on the wall. Use the

3 supplied mounting brackets to mount speakers to the wall.

4

Place the Subwoofer on the floor, near the TV.

 

 

Center Speaker

 

 

Front

Subwoofer

Front

 

 

 

 

Speaker

 

TV

Speaker

 

(left)

 

(right)

 

 

 

 

 

 

VIEWING AREA

 

 

Rear Speaker

 

Rear Speaker

 

(left surround)

 

(right surround)

Helpful Hints

Connect the speaker wires correctly. Improper connections may short circuit the System.

For optimal sound, use the supplied speakers.

Do not connect more than one speaker to any pair of speaker jacks on the System.

Do not connect speakers with an impedance lower than 6 ohms.

Sit in your usual listening position to set up the speaker balance. Details are on pages 52-53.

To avoid magnetic interference, do not place the FRONT speakers too close to your TV.

Placing the REAR (Surround) speakers farther from the listening position than the FRONT and CENTER speakers will weaken the Surround Sound effect.

Secure all speakers to prevent accidents and improve sound quality. Use the supplied mounting brackets to mount speakers to a wall. Details are on page 18.

Page 17
Image 17
Magnavox MRD500VR Speaker Setup, Connecting the speaker wires to the speaker jacks, Setting up Surround Sound, the sound