Magnavox MRD500VR owner manual Multi-Channel Television Sound, Understanding Displays

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 47

Multi-Channel Television Sound 47

Your System can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from the left and right audio channels.Your System also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your System will play tapes recorded in monaural (single- source) sound as well.

Your System also will record a video cassette in Hi-Fi stereo or in second audio, so when you play that tape on the System, it will be in stereo or second audio.

Read the directions on this page to familiarize yourself with the stereo and second audio setups. Follow the directions below to record in stereo or second audio. Follow the directions on page 48 to play tapes recorded in Hi-Fi stereo.

Understanding Displays

When you watch TV channels through the System, portions of the display shown below will appear when you press DISPLAY twice.

STOP	12:00 AM	If SAP or STEREO appears, the program is available
	CH 02
		in second audio or stereo. Even though a program is
	STEREO
		available in second audio or stereo, you must program
	SAP
		the System to receive or record the program.
		Follow the directions below.
		This display is not available during tape play.
SLP

To set the System to receive programs in stereo or second audio, follow these steps.

1	Press VCR, then press DISC/MENU.
	- M E N U -

BTIMER PROGRAMMING

AUTO REPEAT	[OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO	[ON]
SAP

2 Press o or p to select TV STEREO or SAP (Second Audio Program). Press B so ON appears beside your selection.

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT	[OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
B TV STEREO	[ON]
SAP

3 Press DISC/MENU to remove the menu.

			STANDBY-ON
	TIMER SET
	SETUP/	AUDIO/	SUBTITLE	ANGLE
	PROG	BAND
	REC	DISPLAY		ZOOM
		C-RESET
	SKIP/	CLEAR		SKIP/
	CH			CH
					1
	TITLE	MODE/SPEED		RETURN
3		TUNER
	DVD			VCR
	DISC
	MENU			OK
	STOP			PLAY	2
	REW			FF
		PAUSE

Helpful Hints

•You can only receive and record in stereo or second audio programs that are broadcast in stereo or second audio.You can only play in stereo or second audio tapes that were recorded in stereo or second audio. The display shows you if the program is in stereo or second audio.

•If SAP is ON but the program is not broadcast in Second Audio, you will hear and record the program in normal audio.