Magnavox MRD500VR Timer Recording cont’d, Press o or p until the month appears beside Date

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 39

5

Timer Recording (cont’d) 39

Press o or p until the month appears beside DATE.			STANDBY-ON
Then, press B.	TIMER SET
	SETUP/	AUDIO/
Next, press o or p until the day appears.Then, press				ANGLE
	PROG	BAND	SUBTITLE
B. The day of the week will appear. You cannot record more	REC	DISPLAY		ZOOM
than one year in advance.	SKIP/	C-RESET		SKIP/
	CH		CLEAR	CH
	TITLE	MODE/SPEED		RETURN

6

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE	05 / 04 TUE
START TIME	- - : - - - -
END TIME	- - : - - - -
CHANNEL	- -
REC SPEED	- -

To enter the recording’s start time, press o or p until the hour appears beside START TIME. Press B.

Press o or p until the minute appears. Press B. Finally, press o or p to point to AM or PM. AM or PM will flash beside the start time. Press B.

	TUNER
DVD	VCR
DISC		5-8
MENU	OK
STOP	PLAY
REW	FF
	PAUSE

SLOW

1 2 3

VCR/TV

4 5 6

SEARCH MODE

7 8 9

REPEAT REPEAT

	+10 0	A-B
ONE TIME PROGRAM
	SURROUND SOUND	VOLUME
PROGRAM NUMBER 1		– +
DATE	05 / 04 TUE
START TIME	07 : 30 PM
END TIME	- - : - - - -
CHANNEL	- -
REC SPEED	- -
	AM

BPM

7 Repeat the procedure in step 6 to set the recording’s end time.

8 Press o or p until the channel number appears beside CHANNEL.Then, press B.

●If you are using a standard antenna/Cable TV hookup (as shown on page eight), select the channel of the TV program you want to record.

●If you are recording from other equipment, select L1 or L2. To determine L1 or L2, refer to the Helpful Hint below.

●If you are using a Cable Box/Satellite Receiver, select the Cable Box/Satellite Receiver output channel (03 or 04). Then, at the Cable Box/Satellite Receiver, select the channel you want to record. Leave the Cable Box/Satellite Receiver on for the timer recording.

Details are on page nine.

ONE TIME PROGRAM

PROGRAM NUMBER			1
DATE	05	/ 04 TUE
START TIME	07	: 30	PM
END TIME	08	: 30	PM
CHANNEL	16
REC SPEED	- -

Helpful Hints

•Enter the information while the space is flashing.

•To stop a started timer recording, press STOP/EJECT CA on the front of the System.

•If you are recording from other equipment, set CHANNEL to L1 or L2. If you connected the other equipment to the AUDIO and VIDEO In jacks on the front of the System, choose L2. If you connected the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the System, choose L1.

More Helpful Hints are on page 80.