Magnavox MRD500VR Rerecording Tape Duplication, System Plays tape, Unit in VCR mode if necessary

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 37

Rerecording (Tape Duplication) 37

These instructions show you how to copy videotapes.The illustration uses two MRD500 Systems. Other VCRs or Camcorders may operate differently.

1.Audio cables from red/white AUDIO (DVD/VCR OUT) jacks of System 1 to AUDIO (VCR IN) jacks of System 2

2.Video cable from yellow

VIDEO (DVD/VCR OUT) jack of System 1 to yellow VIDEO (VCR IN) jack of System 2

	System 2
	(Records tape)
OUT	IN
TV ANTENNA		COMPONENT		AM
VIDEO	R AUDIO L	VIDEO OUT
DVD/		Y
VCR			75ANTENNAΩ	ΩANTENNA75
OUT
VCR		Pb/Cb
IN
		Pr/Cr	FM
			(75Ω)
S-VIDEO	DIGITAL
	AUDIO OUT
OUT	COAXIAL
P	I PROGRESSIVE

System 1

(Plays tape)

OUT	IN
TV ANTENNA		COMPONENT		AM
VIDEO	R AUDIO L	VIDEO OUT
DVD/		Y
VCR			75ANTENNAΩ	ΩANTENNA75
OUT
VCR		Pb/Cb
IN
		Pr/Cr	FM
			(75Ω)
S-VIDEO	DIGITAL
	AUDIO OUT
OUT	COAXIAL
P	I PROGRESSIVE

3.RF coaxial cable from the TV ANTENNA OUT jack of System 2 to the TV’s ANTENNA IN Jack

FL

FR

C

SL

SR

W

SPEAKER (4Ω)

FL

FR

C

SL

SR

W

SPEAKER (4Ω)

1 Make the connections shown above.

2 System 1 will play your tape. Put a prerecorded tape into the cassette compartment of System 1. Press VCR to

put the unit in VCR mode if necessary.

3 System 2 will record your tape. Insert a blank tape in the cassette compartment of System 2. Press VCR to put

the unit in VCR mode if necessary.

4 Turn on the TV and set it to channel 03 (the RF output channel of System 2). (To change the System’s output channel, see step 6 on page eight.)

5 Point the remote control at System 2. Press Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)

6 Press MODE/SPEED to select SP or SLP at System 2.

7 Press PLAY B (VCR) on the front of System 1 and RECORD I on the front of System 2 at the same time.

To stop recording, press STOP/EJECT CA on System 1, then press STOP/EJECT CA on System 2.

Helpful Hints

•If you use the AUDIO and VIDEO (VCR IN) jacks on the back of System 2, press Number buttons 0, 0, 1 at step 5. L1 will appear on the TV screen and the System’s display panel.

•If you use the AUDIO and VIDEO In jacks on the front of System 2, press Number buttons 0, 0, 2 at step 5. L2 will appear on the TV screen and the System’s display panel.

•Unauthorized recording of copyrighted television programs, videotapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copyright protection, it may not record clearly.